|
|
|
|
|
|
Red Devil 0497 Tile Adhesive, White, 5.5 oz Squeeze Tube
|
|
|
An acrylic or water-based adhesive for permanently bonding many types of floor and wall tiles. Ideal for installing and repairing mosaic, plastic and ceramic tile and linoleum. Cured adhesive is mildew-resistant.
|
|
|
|
|
|
|
|
|
|
Henry 12255 Mastic Adhesive, Off-White, 1 qt, Container
|
|
|
Henry? ReadySet? pre-mixed mastic adhesive is a premium, installer-grade adhesive for installing porcelain, quarry, stone, ceramic and mosaic tile over interior walls, floors and countertops. Henry? 314 can be used to install tile up to 12 in x 12 in and has excellent grab.
|
|
|
|
|
|
|
|
|
|
DAP 7079825190 Ceramic Tile Adhesive, White, 1 qt Pail
|
|
|
High-strength, trowel-grade, latex-based adhesive for installing ceramic and mosaic tile to floors, walls and countertops. Easy to spread, quick-grab formula requires no bracing. Provides excellent water resistance. Non-flammable and easy water cleanup. Interior use.
|
|
|
|
|
|
|
|
|
|
Custom ARL4000QT Ceramic Tile Adhesive, White, 1 qt Pail
|
|
|
AcrylPro? Professional Ceramic tile adhesive is a professional formula adhesive with high bond strengths. Ideal for small format ceramic, mosaic, porcelain and most gauged stone tile on walls or floors. AcrylPro may be used in areas with intermittent water exposure such as tub surrounds and shower walls. Recommended for tile up to 8 in (20 cm) on any side. Can be used with tile up to 15 in (38 cm) on any side but dry time significantly increases. For tile with any side greater than 15 in (38.1 cm), CUSTOM recommends using a polymer modified cement mortar specifically designed for setting large format tile.
|
|
|
|
|
|
|
|
|
|
ADHESIVE CRMC TILE MASTIC GA
|
|
|
High performance for floor and wall tile installations requiring superior bond strength. Extended water-resistance. Quick grab, non-slip strength even on larger wall tiles. Spreads quickly and easily. Use with ceramic or mosaic tile up to 12" x 12". 75 minute open time, 45 minute adjustment time, 110 psi shear strength. Exceeds ANSI A136.1 Type I specifications. Covers approximately 40 to 60 sq. ft. per gallon (3.7 to 5.6 sq m per 3,78 L) using a 3/16" x 5/32" (15 x 15 cm) V-notch trowel.
|
|
|
|
|
|
|
|
|
|
Henry 12256 Mastic Adhesive, Off-White, 1 gal, Container
|
|
|
Henry? ReadySet? pre-mixed mastic adhesive is a premium, installer-grade adhesive for installing porcelain, quarry, stone, ceramic and mosaic tile over interior walls, floors and countertops. Henry? 314 can be used to install tile up to 12 in x 12 in and has excellent grab.
|
|
|
|
|
|
|
|
|
|
DAP 25192 Ceramic Adhesive, White, 1 gal Tub
|
|
|
For installing ceramic and mosaic tile to floors, walls and countertops. High-strength, trowel grade, latex-based adhesive. Easy to spread, quick-grab formula requires no bracing. Provides excellent water resistance. Low-VOC, non flammable and easy water clean-up. Interior use. Meets ANSI A136.1, Type I requirements.
|
|
|
|
|
|
|
|
|
|
QEP 5900-3 Ceramic Tile Adhesive, Off-White, 3.5 gal Pail
|
|
|
ROBERTS 5900 is a high performance, ready-to-use Type I Mastic for installing ceramic, porcelain, natural stone, quarry and mosaic tile on floors and walls. It may be used for countertop, backsplash and shower wall installations, too. It spreads effortlessly, sets quickly and is easy to clean up.
|
|
|
|
|
|
|
|
|
|
Custom ARL40003 Ceramic Tile Adhesive, White, 3.5 gal Pail
|
|
|
AcrylPro? Professional Ceramic tile adhesive is a professional formula adhesive with high bond strengths. Ideal for small format ceramic, mosaic, porcelain and most gauged stone tile on walls or floors. AcrylPro may be used in areas with intermittent water exposure such as tub surrounds and shower walls. Recommended for tile up to 8 in (20 cm) on any side. Can be used with tile up to 15 in (38 cm) on any side but dry time significantly increases. For tile with any side greater than 15 in (38.1 cm), CUSTOM recommends using a polymer modified cement mortar specifically designed for setting large format tile.
|
|
|
|
|
|
|
|
|
|
Custom RBM3 Tile Adhesive, White, 3.5 gal Pail
|
|
|
An all-purpose pro-formula adhesive, ReliaBond is formulated for use on wall, floor and countertop installations of ceramic and stone (walls only) tile. The smooth, creamy acrylic formula spreads easily and offers great slip-resistance on vertical applications. Exceeds ANSI A136.1 Type I requirements for organic adhesives. Suitable for intermittently wet areas such as tub surrounds or shower walls. Recommended for tile up to 8 in on any side. Can be used with wall or countertop tile up to 15 in on any side but dry time significantly increases. For tile with any side greater than 15 in, CUSTOM recommends using a polymer modified thinnest mortar for setting large format tile.
|
|
|
|
My cart:
