|
|
|
|
|
|
Vulcan JL-NP017 Mini Long Nose Plier, 5 in OAL, 0.5 mm Cutting Capacity, 3 cm Jaw Opening, Black Handle, 1/2 in W Jaw
|
|
|
Made of drop-forged hardened high-carbon steel; fully polished finish resists rust and corrosion; precision milled tapered jaws; hardened and tempered wire cutter; non-slip vinyl comfort grips; hardness meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
Vulcan JL-NP016 Needle Nose Plier, 5 in OAL, 0.5 mm Cutting Capacity, 4.2 cm Jaw Opening, Black Handle, 1/2 in W Jaw
|
|
|
Made of drop-forged hardened high-carbon steel; fully polished finish resists rust and corrosion; precision milled tapered jaws; hardened and tempered wire cutter; non-slip vinyl comfort grips; hardness meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
Vulcan JL-NP008 Plier, 6-1/2 in OAL, 1.6 mm Cutting Capacity, 3.9 cm Jaw Opening, Black Handle, 3/4 in W Jaw, 2 in L Jaw
|
|
|
Made of drop-forged high-carbon steel; fully polished rust-resistant finish; tempered and heat-treated for hardness; comfortable non-slip grips.
|
|
|
|
|
|
|
|
|
|
Vulcan PC920-34 Plier, 6-1/4 in OAL, 1.6 mm Cutting Capacity, 4.7 cm Jaw Opening, Black Handle, 3/4 in W Jaw, 2 in L Jaw
|
|
|
Drop-forged hardened high-carbon steel; fully polished finish resists rust and corrosion; precision milled tapered jaws; hardened and tempered wire cutter; non-slip vinyl comfort grips; hardness meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
Vulcan PC974-01 Bent Nose Plier, 6 in OAL, 1.6 mm Cutting Capacity, 3.9 cm Jaw Opening, Black Handle, 3/4 in W Jaw
|
|
|
Drop-forged chrome nickel steel for durability. Fully polished finish resists rust and corrosion. Precision milled tapered jaws. Hardened and tempered wire cutter. Ergonomic anti-slip cushioned grips for comfort and less hand fatigue. Hardness meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
Vulcan JL-NP009 Plier, 8 in OAL, 1.6 mm Cutting Capacity, 5 cm Jaw Opening, Black Handle, 7/8 in W Jaw, 2-1/2 in L Jaw
|
|
|
Made of drop-forged high-carbon steel; fully polished rust-resistant finish; tempered and heat-treated for hardness; comfortable non-slip grips.
|
|
|
|
|
|
|
|
|
|
Vulcan PC920-35 Plier, 8 in OAL, 1.6 mm Cutting Capacity, 5.2 cm Jaw Opening, Black Handle, 7/8 in W Jaw, 2-1/2 in L Jaw
|
|
|
Drop-forged hardened high-carbon steel; fully polished finish resists rust and corrosion; precision milled tapered jaws; hardened and tempered wire cutter; non-slip vinyl comfort grips; hardness meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
Vulcan PC974-02 Bent Nose Plier, 8 in OAL, 1.6 mm Cutting Capacity, 5.2 cm Jaw Opening, Black Handle, 7/8 in W Jaw
|
|
|
Drop-forged chrome nickel steel for durability. Fully polished finish resists rust and corrosion. Precision milled tapered jaws. Hardened and tempered wire cutter. Ergonomic anti-slip cushioned grips for comfort and less hand fatigue. Hardness meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
STANLEY 84-096 Nose Plier, 6 in OAL, Black Handle, Double-Dipped Handle, 1/8 in W Tip
|
|
|
Made of forged steel construction with long tempered jaws for working in hard-to-reach areas. Rust-resistant finish. Double-dipped handle for comfort. Meets or exceeds ANSI standards.
|
|
|
|
|
|
|
|
|
|
STANLEY 84-031W Nose Plier, 6 in OAL, Black/Yellow Handle, Comfort-Grip Handle
|
|
|
Slip-resistant bi-material handle for a comfortable grip; drop-forged steel is strong and durable; meets ANSI specifications; fixed joint design used for bending, turning and cutting, long nose design for use in hard-to-reach areas.
|
|
|
|
My cart:
