|
|
|
|
|
|
Cutler-Hammer BRFPP Filler Plate, 3 in L, 1 in W, Plastic, For: 1 in Circuit Breakers, 400 A and 600 A Load Centers
|
|
|
Plastic (snap-in) for type BR 1 in space. May also be used with 400 and 600 A load centers.
|
|
|
|
|
|
|
|
|
|
GE THFILLERP Filler Plate Kit, 6-7/8 in L, 2-7/8 in W
|
|
|
GE Filler Plate Kit, 6-7/8 in Length, 2-7/8 in Width, 3/4 in Height
|
|
|
|
|
|
|
|
|
|
GE TGL1P Ground Bar Kit, 1/2 in L, 7-Terminal
|
|
|
For grounding copper or aluminum terminals in a GE load center. Offers 4 small holes for 14 to 8 AWG copper or 12 to 8 AWG aluminum terminals and 3 large holes for 14 to 4 AWG copper or 12 to 4 AWG aluminum terminals. UL listed and ANSI certified. 6-7/8 in H x 2-7/8 in W x 1/2 in depth, 0.105 lb.
|
|
|
|
|
|
|
|
|
|
Cutler-Hammer GBKP10P Ground Bar Kit, 4.7 in L, 10 -Terminal
|
|
|
Cutler-Hammer Ground Bar Kit, 10 Terminals, 4.7 in Length, 2.3 in Width, 1/2 in Height
|
|
|
|
|
|
|
|
|
|
Square D PK3GTA-1CP Ground Bar Kit, 3 -Terminal, Aluminum
|
|
|
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
|
|
|
|
|
|
|
|
|
|
GE TLK20CP Neutral/Ground Lug Kit, 6 to 2/0 AWG Wire
|
|
|
For use with wire range 6-2/0. Can be mounted on any neutral or ground position by simply removing the termination screw. UL listed. 2-7/8 in H x 3/4 in W x 6-7/8 in D, 0.07 lb.
|
|
|
|
|
|
|
|
|
|
Square D Homeline QOFPCP Filler Plate, 3 in L, 1-1/2 in W, For: QO Load Centers
|
|
|
Fills opening in covers if twist out is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL listed and ANSI Certified.
|
|
|
|
|
|
|
|
|
|
Eaton GBKP14P Ground Bar Kit, 5.69 in L, 14-Terminal, 14 to 4 AWG Wire
|
|
|
Eaton Ground Bar Kit, Number of Terminals: 14, Wire Size: 14 to 4 AWG, 5.69 in L
|
|
|
|
|
|
|
|
|
|
Square D PK4GTACP Ground Bar Kit, 4 -Terminal, Aluminum
|
|
|
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
|
|
|
|
|
|
|
|
|
|
Square D QO70AN Neutral Lug Kit, #12 to 2 AWG Al, #14 to 4 AWG Cu Wire
|
|
|
Made for QO load centers. Field installed for number 12 to 2 Al or number 14 to 4 Cu wire. QO accessories can only be used with QO load centers.
|
|
|
|
My cart:
