|
|
|
|
|
|
Gardner Bender GSE-15310 Staple, 13/16 in W Crown, 1-3/8 in L Leg
|
|
|
Attach large diameter cable to wood surfaces with the Gardner Bender 1-3/8 in x 13/16 in steel service entrance cable staples for #6/3 SEU cable 10 pack. These staples feature offset legs to prevent wood splitting and a diamond head for easy hammering.
|
|
|
|
|
|
|
|
|
|
Gardner Bender PCC-1525 Cable Staple, 1/4 in W Crown, Polyethylene
|
|
|
These low-voltage coaxial cable staples feature UV-resistant polyethylene saddles able to withstand both indoor and outdoor applications. Zinc-plated nails resist rust and corrosion and feature a sharp tip for easy starting and to reduce cracking and splintering of wood during installation. One nail per staple facilitates a quick hammer installation. Designed to secure cable of 1/4 in Dia or less including CAT6 or RG type cables CAT 6, RG-6/U, RG-62A, RG-62/U to wood.
|
|
|
|
|
|
|
|
|
|
Gardner Bender PCS-1600T Masonry Staple, 1/4 in W Crown, Polyethylene
|
|
|
The 1/4 in black polyethylene clip-on coaxial masonry staples 25-pack feature UV-resistant polyethylene saddles that are suitable for indoor and outdoor applications. These staples are ideal for securing RG-59 and RG-6 coaxial cables into cement block and masonry and include hardened nails that can penetrate cement block, mortar or plaster surfaces.
|
|
|
|
|
|
|
|
|
|
Gardner Bender PSW-1600T Cable Staple, 3/16 in W Crown, Polyethylene
|
|
|
The Gardner Bender 3/16 in white polyethylene low-volt staples secure bell, speaker, thermostat and telephone wire. These staples feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration. The zinc-plated nails resist rust and corrosion, making this staple ideal for both indoor and outdoor applications and with only one nail per staple installation is quick and easy.
|
|
|
|
|
|
|
|
|
|
Gardner Bender PSB-1600T Cable Staple, 3/16 in W Crown, 7/8 in L Leg
|
|
|
The 3/16 in black polyethylene low-volt staples 25-pack feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration for indoor and outdoor use and are suitable for securing speaker, telephone, bell and other low-volt wires.
|
|
|
|
|
|
|
|
|
|
Gardner Bender MSI-1525T Metal Staple, 1/2 in W Crown, Polyethylene
|
|
|
Insulated metal staples secure a large variety of cable types including NM, BX, MC, AC and UF cables. These staples offer a durable polyethylene insulating sheath to prevent arc faults if the staple is over-driven through a cable jacket. Strong steel constructed staples offer sharp, burr-free tips which easily bite into wood upon hammering and deter wood from splitting. Do not drive the staple beyond the insulation stops to achieve a clean insertion and secure wiring without damage to cable or wood. 1/2 in staples secure 2 conductor NO 12 and NO 14 non-metallic BX, MC, AC and UF cable.
|
|
|
|
|
|
|
|
|
|
Gardner Bender MS-1575T Cable Staple, 9/16 in W Crown, 1-1/4 in L Leg, Metal, Graphite, 18 PK
|
|
|
The Gardner Bender 9/16 in graphite metal staples 18-pack feature durable metal construction with a graphite metallic finish. These staples are ideal for securing non-metallic cable and can be drive in with a hammer. The recessed heads help protect your cable and the sharp tips help the staples start easily.
|
|
|
|
|
|
|
|
|
|
Gardner Bender PS-1550T Cable Staple, 1/2 in W Crown, Plastic/Polyethylene, 15 PK
|
|
|
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.
|
|
|
|
|
|
|
|
|
|
Gardner Bender MS-1550T Cable Staple, 1/2 in W Crown, 1-1/8 in L Leg, Metal
|
|
|
The Gardner Bender 1/2 in graphite metal staples 24-pack are ideal for securing non-metallic cable. These staples feature durable metal construction with a graphite metallic finish. The recessed heads help protect your cable and the sharp tips offer an easy start. These staples can be driven in with a hammer.
|
|
|
|
|
|
|
|
|
|
Gardner Bender PS-1575T2 Cable Staple, 3/4 in W Crown
|
|
|
These polyethylene staples with zinc-plated nails are designed to offer fast and easy installation when securing most types of non-metallic cables. The zinc-plated nails not only resist rust and corrosion but drive together for fast installation with a hammer while the recessed heads ensure minimum exposure and avoid snags. The smooth polyethylene saddle protects wire and will not rust, rot or deteriorate. Use to attach all NM cable to joists, framing and other wood installations.
|
|
|
|
My cart:
