|
|
|
|
|
|
Oatey 31012 Solvent Cement, 4 oz Can, Liquid, Clear
|
|
|
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564.
|
|
|
|
|
|
|
|
|
|
Oatey 30999 Solvent Cement, Opaque Liquid, Black, 4 oz Can
|
|
|
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications.
|
|
|
|
|
|
|
|
|
|
Oatey 30883 Solvent Cement, 4 oz Can, Liquid, Gray
|
|
|
Medium bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature of 40 to 110 deg.
|
|
|
|
|
|
|
|
|
|
Oatey 30890 Solvent Cement, 4 oz Can, Liquid, Blue
|
|
|
Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F.
|
|
|
|
|
|
|
|
|
|
Oatey 30818 Solvent Cement, 4 oz Can, Liquid, Milky Clear
|
|
|
Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
|
|
|
|
|
|
|
|
|
|
Oatey 31910 Solvent Cement, 4 oz Can, Liquid, Yellow
|
|
|
Medium bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in Dia interference fit only and systems up to 180 deg F. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
|
|
|
|
|
|
|
|
|
|
Oatey 31017 Cement, 4 oz, Liquid, Clear
|
|
|
Oatey? PVC Medium Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
|
|
|
|
|
|
|
|
|
|
Oatey 31128 Solvent Cement, 4 oz Can, Liquid, Orange
|
|
|
Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dia. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
|
|
|
|
|
|
|
|
|
|
Harvey 18100-24 Solvent Cement, 4 oz Can, Liquid, Clear
|
|
|
Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
|
|
|
|
|
|
|
|
|
|
Oatey 30889 Solvent Cement, 8 oz Can, 285 g/L, Opaque Liquid, Black
|
|
|
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications.
|
|
|
|
My cart:
