|
|
|
|
|
|
RemGrit E0213446 Edge Hole Saw, 1-1/4 in Dia, 1-1/8 in D Cutting, Carbide Cutting Edge
|
|
|
Cutting edge of tungsten carbide particles bonded to alloy steel back cuts extremely hard abrasive materials. High heat and abrasion resistance, no teeth to dull or chip, resists snagging, smooth cutting, greater wear resistance. Used in applications such as laminates, fiberglass, ceramic tile, marble and slate, cast iron or composites, 1/4 in quick-change shank.
|
|
|
|
|
|
|
|
|
|
ARTU 02885 Replacement Arbor and Pilot Bit, 5/8-18 Thread, 3/8 in Shank, Hex Shank
|
|
|
Tungsten carbide particles are self-sharpening, so when a particle chips, a new surface is created in its place.
|
|
|
|
|
|
|
|
|
|
Lenox Diamond 121063DGDS Hole Saw, 3/16 in Dia, 1-1/8 in D Cutting, 3/8 in Arbor
|
|
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
|
|
|
|
|
|
|
|
|
Diablo DHS0188DG Diamond Grit Hole Saw, 3/16 in Dia
|
|
|
Diablo's high-performance diamond grit hole saws deliver longer life and faster material removal when boring holes into tile, stone and glass. A continuous rim diamond grit edge delivers lasting durability and maximizes cut quality in masonry applications. An integrated wax lubricant cools the cutting edge and reduces friction and heat build-up while drilling holes. Diablo's hole saws are compatible with Diablo's SnapLock? PLUS mandrel system, resulting in quick, easy and effortless cup changes.
|
|
|
|
|
|
|
|
|
|
Diablo DHS0250DG Diamond Grit Hole Saw, 1/4 in Dia
|
|
|
Diablo's high-performance diamond grit hole saws deliver longer life and faster material removal when boring holes into tile, stone and glass. A continuous rim diamond grit edge delivers lasting durability and maximizes cut quality in masonry applications. An integrated wax lubricant cools the cutting edge and reduces friction and heat build-up while drilling holes. Diablo's hole saws are compatible with Diablo's SnapLock? PLUS mandrel system, resulting in quick, easy and effortless cup changes.
|
|
|
|
|
|
|
|
|
|
QEP 10075 Hole Saw, 1/4 in Dia, Diamond Cutting Edge
|
|
|
The QEP wetDRY diamond hole saws are designed for the easy, fast and accurate cutting of porcelain, ceramic and glass tiles. These hole saws feature a special diamond grit edge for faster and smoother cuts, while using less water than conventional diamond drill bits. Simply dip the hole saw into water and drill the desired hole for professional quality and results.
|
|
|
|
|
|
|
|
|
|
DEWALT DW5570 Drill Bit, 3/16 in Dia, 2-1/4 in OAL, Spiral Flute, 3/8 in Dia Shank, Round Shank
|
|
|
Featuring diamond-welded tips for long life and extreme durability, DeWALT? tile drill bits power through dense tile, solid-body porcelain and more. Reverse-spiral threads enable continuous water cooling for quick, clean drilling. Core ejection slots remove plugs for repeated cuts.
|
|
|
|
|
|
|
|
|
|
Diablo DHS0312DG Diamond Grit Hole Saw, 5/16 in Dia
|
|
|
Diablo's high-performance diamond grit hole saws deliver longer life and faster material removal when boring holes into tile, stone and glass. A continuous rim diamond grit edge delivers lasting durability and maximizes cut quality in masonry applications. An integrated wax lubricant cools the cutting edge and reduces friction and heat build-up while drilling holes. Diablo's hole saws are compatible with Diablo's SnapLock? PLUS mandrel system, resulting in quick, easy and effortless cup changes.
|
|
|
|
|
|
|
|
|
|
Milwaukee Diamond Plus 49-56-0505 Hole Saw, 1/4 in Dia, 1 in D Cutting, 5/8-18 Arbor, Diamond Grit Cutting Edge
|
|
|
Choose the Milwaukee Diamond Plus hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone and glass applications, Diamond Plus offers the lowest cost-per-hole on the market.
|
|
|
|
|
|
|
|
|
|
QEP 10080 Hole Saw, 5/16 in Dia, Diamond Cutting Edge
|
|
|
The QEP wetDRY diamond hole saws are designed for the easy, fast and accurate cutting of porcelain, ceramic and glass tiles. These hole saws feature a special diamond grit edge for faster and smoother cuts, while using less water than conventional diamond drill bits. Simply dip the hole saw into water and drill the desired hole for professional quality and results.
|
|
|
|
My cart:
