|
|
|
|
|
|
Tru-Flate 21-147 Air Hose Fitting, 3/8 in, MNPT x Barb, Brass
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
|
|
|
|
|
|
|
|
|
Tru-Flate 12-125 Hose Plug, T-Style, 1/4 in, MNPT, Steel
|
|
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
|
|
|
|
|
|
|
|
|
Tru-Flate 21-123 Air Hose Fitting, 1/4 in, MNPT x Barb, Brass
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
|
|
|
|
|
|
|
|
|
Tru-Flate 21-595 Hose Adapter, 1/4 in, MNPT x MNPS, Brass
|
|
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
|
|
|
|
|
|
|
|
|
Tru-Flate 12-225 Plug, I/M-Style, 1/4 in, MNPT, Steel
|
|
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
|
|
|
|
|
|
|
|
|
Tru-Flate 12-325 Plug, A-Style, 1/4 in, MNPT, Steel
|
|
|
This design is identified by a 5/16 in pilot and ball groove which is nearly round. It is similar in appearance to the industrial Interchange and care must be taken to correctly identify. Couplers are available in both standard and push to connect style sleeve.
|
|
|
|
|
|
|
|
|
|
Tru-Flate 21-423 Hose Splicer, Brass
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
|
|
|
|
|
|
|
|
|
Tru-Flate 21-535 Air Hose Bushing, 1/4 x 3/8 in, FNPT x MNPT, Brass
|
|
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
|
|
|
|
|
|
|
|
|
Tru-Flate 12-135 Plug, T-Style, 1/4 in, FNPT, Steel
|
|
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
|
|
|
|
|
|
|
|
|
Tru-Flate 12-235 Plug, I/M-Style, 1/4 in, FNPT, Steel
|
|
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
|
|
|
My cart:
