|
|
|
|
|
|
DEWALT 08293-PWR Mixing Nozzle, Plastic, For: AC100+ Gold 10 oz and 12 oz Cartridge System
|
|
|
DEWALT Mixing Nozzle, Plastic, Dimensions: 8 in L, Suitable for: AC100+ Gold 10 oz and 12 oz Cartridge System
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie ETB ETB6 Hole Cleaning Brush, 4 in L Brush, 16 in OAL, Nylon Bristle
|
|
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie ETB ETB8 Hole Cleaning Brush, 4 in L Brush, 16 in OAL, Nylon Bristle
|
|
|
Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For use with Simpson Strong-Tie? ET-3G? adhesives.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie AMN19Q AMN19Q-RP5 Adhesive Mixing Nozzle, For: AT-XP Adhesive Products
|
|
|
Simpson Strong-Tie? AMN19Q mixing nozzles ensure proper proportioning and mixing of Simpson Strong-Tie? acrylic formulations. Required for compliance with manufacturer's installation instructions.
|
|
|
|
|
|
|
|
|
|
Adhesives Technology T3438CK Mixing Nozzle Kit, For: 22 oz Ultra Bond Epoxy Systems
|
|
|
Nozzle kit for Ultrabond epoxy 22 oz system. Hi-Flow nozzles reduce waste while increasing flow. 15 in length snaps off to 10 in if required. 3/8 in Dia at tip. Built-in mixing nut allows for fast and easy attachment to cartridge.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie EMN22I-RP5 Adhesive Mixing Nozzle, For: 22 and 56 oz Epoxy Adhesive Cartridges
|
|
|
An 18-element mixing nozzle with integrated nut for use with 10 oz, 22 oz and 56 oz epoxy adhesive cartridges.
|
|
|
|
|
|
|
|
|
|
DEWALT AC100+ GOLD 8478SDF-PWR Adhesive Epoxy, Paste, 9.5 fl-oz Cartridge, Quick-Shot Cartridge
|
|
|
The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The adhesive is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials. It can be considered for use in solid base materials as well as hollow base materials with screen tubes.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie AT3G AT3G10 High-Strength Hybrid Acrylic Adhesive, Paste, 9.5 oz Cartridge, Coaxial Cartridge
|
|
|
AT-3G? is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications, AT-3G? dispenses easily and offers a fast curing time for same-day bolt up. It can be specified for a wide range of in-service temperatures and maintains its strong bond strength in extreme environments for ultimate design and jobsite flexibility. Tested and code compliant with the IBC and IRC, AT-3G? hybrid adhesive is easy to install with the conventional blow-brush-blow hole-cleaning method.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie SET-3G SET3G10 High-Strength Epoxy Adhesive, 8.5 oz Cartridge, Coaxial Cartridge
|
|
|
SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions and temperature extremes.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie CDT10S Manual Dispensing Gun, For: 10 oz Single Adhesive Cartridges, 22 oz Cartridge, 1 PK
|
|
|
The CDT10S features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The CDT10S also features double-gripping plates that help extend tool life.
|
|
|
|
My cart:
